Waterborne systemsWaterborne epoxy topcoat
Waterborne epoxy topcoat: seamless and flat, bonds firmly to concrete and metal, hardness ≥ H and abrasion ≤ 0.03 g.
Overview
This waterborne epoxy topcoat is a two-component epoxy coating based on a waterborne epoxy hardener, pigments and fillers, and epoxy resin. It offers a seamless, flat surface and strong environmental performance.
Key features
- Eco-friendly and low odour: water-based formula with very low VOC, no smell during application
- Strong adhesion: bonds firmly to concrete, metal and other substrates, resists peeling
- Abrasion and impact resistant: high surface hardness for a long service life
Recommended for
- Underground car parks
- Warehouses
- Offices and similar areas that must stay highly clean
Technical data
- Abrasion resistance (750 g/500 r)
- 0.02 g
- Tensile bond strength
- 2.8 MPa standard / 2.8 MPa after water immersion
- Impact resistance
- Light load (500 g ball) / heavy load (1000 g ball): film free of cracks or peeling
- Skid resistance (dry friction coefficient)
- 1.0
- VOC content
- Not detected
- Total benzene, toluene, ethylbenzene and xylene
- Not detected
Values are typical and depend on substrate, ambient conditions and build-up. Request the current TDS before specifying.
Test reports & certificates
Scans of official third-party reports. Click a cover to read the full document.
Related systems
Waterborne systemsWaterborne epoxy primer & mid-coat
Water-based primer and intermediate coat: VOC ≤ 50 g/L, compressive strength ≥ 65 MPa, fills 3–8 mm substrate defects and cures from 5 to 35 °C.
View details
Waterborne systemsWaterborne polyurethane topcoat
Waterborne polyurethane topcoat with outstanding abrasion and scratch resistance, weather resistance, strong adhesion and low viscosity for easy application.
View detailsNeed this system specified for your project?
Tell us the substrate and the load. We will confirm the build-up, coverage rate and lead time.