Solvent-based anti-static epoxy intermediate

Key features

• Efficient anti-static performance: low resistance that conducts static charge away stably over time
• Strong adhesion: bond strength to the substrate ≥ 3.5 MPa, keeping the coating system free of delamination
• Abrasion- and pressure-resistant: compressive strength ≥ 75 MPa, Mohs hardness ≥ 5, withstands mechanical wear
• Fast-drying and low-emission: recoatable after 4 hours (25 °C), VOC content ≤ 120 g/L, certified by anti-static flooring testing

Recommended for

• Intermediate coat in anti-static flooring systems
• Concrete substrates

Technical data

Condition in container

Uniform after stirring, no hard lumps

Drying time

Surface-dry ≤ 8 h / through-dry ≤ 48 h

Alkali resistance [saturated Ca(OH)₂, 48 h]

Film intact: no blistering, peeling or discolouration

Surface resistance (static-conductive grade)

1×10³ Ω

Volume resistance (static-conductive grade)

1×10³ Ω

Values are typical and depend on substrate, ambient conditions and build-up. Request the current TDS before specifying.

Need this system specified for your project?

Tell us the substrate and the load. We will confirm the build-up, coverage rate and lead time.