Polyurethane & anti-corrosionTransparent vinyl ester heavy-duty anti-corrosion topcoat
Transparent vinyl ester heavy-duty topcoat with ≥ 90% clarity: 5,000 h UV ageing resistance, no yellowing outdoors for 10 years, keeping the substrate appearance intact.
Overview
This transparent vinyl ester heavy-duty anti-corrosion topcoat is a clear flooring material for the heavy-duty anti-corrosion field, based on a dedicated vinyl ester resin as the film-forming substance.
Key features
- High transparency with corrosion protection: clarity ≥ 90%, withstands 98% sulphuric acid and 50% sodium hydroxide, ISO 12944 C5-M certified
- Outstanding weather resistance: 5,000 h UV ageing resistance, no yellowing outdoors for 10 years
- Tough and wear-resistant: impact resistance ≥ 50 kg·cm and Mohs hardness ≥ 6, for heavy-load corrosive environments
- Fast drying and eco-friendly: surface dry in ≤ 1.5 h at 23 °C, VOC ≤ 100 g/L, can be applied in thick coats without sagging
Recommended for
- Special locations requiring heavy-duty protection against strong acids, strong solvents, strong oxidisers, salts and other chemical corrosion
Technical data
- Condition in container
- No hard lumps after stirring
- Surface-dry time
- ≤ 8 h
- Through-dry time
- ≤ 48 h
- Pencil hardness (gouge), H
- ≥ 70
- Abrasion resistance (750 g/500 r)
- ≤ 0.03 g
- Tensile bond strength (standard conditions)
- ≥ 2 MPa
Values are typical and depend on substrate, ambient conditions and build-up. Request the current TDS before specifying.
Related systems
Polyurethane & anti-corrosionWaterborne polyurethane mortar
Organic-inorganic interpenetrating-network mortar: abrasion ≤ 0.02 g, compressive strength ≥ 80 MPa, service from −40 °C to 120 °C and pH 1–14 chemical resistance.
View details
Polyurethane & anti-corrosionUltra-abrasion polyurethane topcoat
Three-component, high-solids polyurethane topcoat reinforced with inorganic metallic aggregate: abrasion 0.010 g in testing (standard limit ≤ 0.030 g), UV-stable and non-yellowing, for indoor and outdoor use.
View details
Polyurethane & anti-corrosionTransparent vinyl ester primer
Vinyl ester primer with nano-level penetration of 5–8 mm, tensile strength ≥ 3.5 MPa, resistance to pH 2–14 and overcoating in 1.5 hours.
View detailsNeed this system specified for your project?
Tell us the substrate and the load. We will confirm the build-up, coverage rate and lead time.