Epoxy systemsFloating-sand epoxy self-levelling
A new composite floor topping that pairs decorative appeal with abrasion and slip resistance — for industrial and commercial spaces alike.
Group-level sales figure for the 2025 financial year, shown as an approximate value.
Overview
This floating-sand self-levelling system is a new type of composite floor topping that combines lightweight resin sand with low-viscosity epoxy resin in a high-quality bond.
Key features
- Highly decorative — multi-coloured quartz aggregate in free combinations, seamless and upmarket
- Abrasion and load resistant — withstands impact and heavy loads in high-traffic industrial and commercial areas
- Chemical resistance to acids, alkalis, oils and solvents — suited to clean workshops
- Slip-resistant and waterproof — safer in service
- Low-VOC and solvent-free — compliant and safe to apply
Recommended for
- Areas requiring a high level of cleanliness and a decorative finish
- Industrial floors
- Commercial floors — the main application
Technical data
- Drying time
- Surface-dry 6 h / through-dry 24 h
- Shore hardness (Type D)
- 81 (measured)
- Abrasion resistance (750 g/500 r)
- 0.010 g
- Compressive strength
- 79 MPa
- Tensile bond strength
- 4.0 MPa standard / 3.9 MPa after water immersion
- Impact resistance (1000 g steel ball, heavy duty)
- Film free of cracks or peeling
- Skid resistance (dry friction coefficient)
- 0.77
- Water resistance (168 h)
- No blistering or peeling, no discolouration
- Alkali resistance (20% NaOH, 72 h)
- No blistering or peeling, no discolouration
- Acid resistance (10% H₂SO₄, 48 h)
- No blistering or peeling, slight discolouration
- Oil resistance (No. 120 mineral spirit, 72 h)
- No blistering or peeling, no discolouration
Values are typical and depend on substrate, ambient conditions and build-up. Request the current TDS before specifying.
Finished floors
Real floors finished with this system.
Test reports & certificates
Scans of official third-party reports. Click a cover to read the full document.
Related systems
Epoxy systemsHigh-solid epoxy topcoat
Roller-applied thin-build epoxy topcoat — very high solids, thicker film per coat, vivid colour and high gloss.
View details
Epoxy systemsSolvent-free epoxy self-levelling
Solvent-free, build-coat self-levelling epoxy with a mirror-smooth finish — abrasion, load and chemical resistant.
View details
Epoxy systemsSolvent-free epoxy primer & intermediate coat
Low-viscosity solvent-free epoxy for primer and intermediate coats — deep concrete penetration, high bond strength and excellent alkali resistance.
View detailsNeed this system specified for your project?
Tell us the substrate and the load. We will confirm the build-up, coverage rate and lead time.