Epoxy systemsHigh-solid epoxy topcoat
Roller-applied thin-build epoxy topcoat — very high solids, thicker film per coat, vivid colour and high gloss.
Overview
This high-solid epoxy topcoat is a two-component, roller-applied, seamless, high-performance thin-film epoxy floor coating produced from premium low-viscosity epoxy resin. It features a high resin content, vivid colours and high gloss.
Key features
- Very high solids content (≥ 80%) — thicker film per coat, fewer coats and faster application
- Tough, abrasion-resistant film with impact and chemical resistance (acids, alkalis, solvents) for demanding environments
- High gloss and good colour retention — decorative and protective at the same time
Recommended for
- Manufacturing workshops in the electrical, electronics, food, pharmaceutical, chemical and machinery industries
- Concrete and terrazzo floors in car parks and warehouses
- Offices and shopping malls
Technical data
- VOC content
- 104 g/L
- Drying time
- Surface-dry 4 h / through-dry 24 h
- Pencil hardness (gouge)
- 2H (measured)
- Abrasion resistance (750 g/500 r)
- 0.019 g
- Tensile bond strength
- 3.0 MPa standard / 2.9 MPa after water immersion
- Impact resistance (1000 g steel ball, heavy duty)
- Film free of cracks or peeling
- Skid resistance (dry friction coefficient)
- 0.71
- Water resistance (168 h)
- No blistering or peeling, no discolouration
- Alkali resistance (20% NaOH, 72 h)
- No blistering or peeling, no discolouration
- Acid resistance (10% H₂SO₄, 48 h)
- No blistering or peeling, slight discolouration
- Oil resistance (No. 120 mineral spirit, 72 h)
- No blistering or peeling, no discolouration
Values are typical and depend on substrate, ambient conditions and build-up. Request the current TDS before specifying.
Test reports & certificates
Scans of official third-party reports. Click a cover to read the full document.
Related systems
Epoxy systemsSolvent-free epoxy self-levelling
Solvent-free, build-coat self-levelling epoxy with a mirror-smooth finish — abrasion, load and chemical resistant.
View details
Epoxy systemsFloating-sand epoxy self-levelling
A new composite floor topping that pairs decorative appeal with abrasion and slip resistance — for industrial and commercial spaces alike.
View details
Epoxy systemsSolvent-free epoxy primer & intermediate coat
Low-viscosity solvent-free epoxy for primer and intermediate coats — deep concrete penetration, high bond strength and excellent alkali resistance.
View detailsNeed this system specified for your project?
Tell us the substrate and the load. We will confirm the build-up, coverage rate and lead time.