Epoxy systemsSolvent-free epoxy primer & intermediate coat
Low-viscosity solvent-free epoxy for primer and intermediate coats — deep concrete penetration, high bond strength and excellent alkali resistance.
Group-level sales figure for the 2025 financial year, shown as an approximate value.
Overview
This solvent-free epoxy primer and intermediate coat is based on low-viscosity epoxy as the main film-forming substance, blended with a special high-quality hardener. It offers low VOC, high penetration, good film formation and strong compressive strength as an intermediate coat.
Key features
- Meets the environmental requirements of GB/T 22374 — solvent-free, heavy-metal-free and very low odour during application
- Good penetration into concrete and high bond strength
- Excellent alkali resistance — tolerates the high alkalinity of concrete substrates
- Easy to apply — roller, squeegee or spray
- Good coating compatibility — as a primer it pairs with epoxy and polyurethane intermediate coats and topcoats
Recommended for
- Primer on concrete substrates in flooring systems
- Primer for epoxy mortar, and intermediate coats with sand broadcast or skim coating
- Properly prepared steel surfaces
Technical data
- VOC content
- 13 g/L
- Free formaldehyde
- Not detected
- TVOC emission
- 0.8 mg/m³
- Formaldehyde emission
- Not detected
- Drying time
- Surface-dry 6 h / through-dry 24 h
- Alkali resistance (saturated Ca(OH)₂, 48 h)
- Film intact: no blistering, peeling or discolouration
- Tensile bond strength
- 2.6 MPa
- Compressive strength
- 54 MPa
Values are typical and depend on substrate, ambient conditions and build-up. Request the current TDS before specifying.
Test reports & certificates
Scans of official third-party reports. Click a cover to read the full document.
Related systems
Epoxy systemsHigh-solid epoxy topcoat
Roller-applied thin-build epoxy topcoat — very high solids, thicker film per coat, vivid colour and high gloss.
View details
Epoxy systemsSolvent-free epoxy self-levelling
Solvent-free, build-coat self-levelling epoxy with a mirror-smooth finish — abrasion, load and chemical resistant.
View details
Epoxy systemsFloating-sand epoxy self-levelling
A new composite floor topping that pairs decorative appeal with abrasion and slip resistance — for industrial and commercial spaces alike.
View detailsNeed this system specified for your project?
Tell us the substrate and the load. We will confirm the build-up, coverage rate and lead time.