Polyurethane & anti-corrosionWaterborne polyurethane mortar
Organic-inorganic interpenetrating-network mortar: abrasion ≤ 0.02 g, compressive strength ≥ 80 MPa, service from −40 °C to 120 °C and pH 1–14 chemical resistance.
Overview
This waterborne polyurethane mortar is a composite flooring material with an interpenetrating network structure of organic and inorganic materials, offering superior physical and chemical resistance properties compared with organic resin coatings and inorganic mortars.
Key features
- Outstanding wear and compression resistance: abrasion coefficient ≤ 0.02 g and compressive strength ≥ 80 MPa, withstanding frequent heavy-machinery traffic
- Extreme weather and temperature resistance: performs from −40 °C to 120 °C, UV-resistant and non-yellowing
- Chemical protection: resists strong acids and alkalis (pH 1–14), oils and organic solvents
- Waterborne eco-technology: zero VOC emissions, certified by EU SGS, food-grade safety standard
- Fast intelligent installation: 4 h to surface dry, 24 h to bear load, seamless self-levelling process
Recommended for
- Food processing plants, dairies, breweries, distilleries and pharmaceutical intermediate workshops
- Wet and dry processing areas, cold storage and freezer rooms, and similar floors with special requirements
Technical data
- Initial flowability
- 150 mm
- Vicat softening point
- > 155 ℃
- Compressive strength
- 24 h 26.6 MPa / 7 d 40.7 MPa
- Flexural strength
- 24 h 8.3 MPa / 7 d 10.2 MPa
- Abrasion resistance (500 g/100 r)
- 0.03 g
- Tensile bond strength
- 4.2 MPa
- Skid resistance (dry friction coefficient)
- 0.6
- Impact resistance (1000 g steel ball)
- Surface free of cracks or peeling
- Water resistance (168 h)
- No blistering, peeling, cracking or discolouration
- Alkali resistance (20% NaOH, 72 h)
- No blistering, peeling, cracking or discolouration
- Acid resistance (10% H₂SO₄, 48 h)
- No blistering, peeling, cracking or discolouration
- Salt-water resistance (3% NaCl, 168 h)
- No blistering, peeling, cracking or discolouration
- VOC content
- 16 g/L
Values are typical and depend on substrate, ambient conditions and build-up. Request the current TDS before specifying.
Finished floors
Real floors finished with this system.
Test reports & certificates
Scans of official third-party reports. Click a cover to read the full document.
Related systems
Polyurethane & anti-corrosionUltra-abrasion polyurethane topcoat
Three-component, high-solids polyurethane topcoat reinforced with inorganic metallic aggregate: abrasion 0.010 g in testing (standard limit ≤ 0.030 g), UV-stable and non-yellowing, for indoor and outdoor use.
View details
Polyurethane & anti-corrosionTransparent vinyl ester primer
Vinyl ester primer with nano-level penetration of 5–8 mm, tensile strength ≥ 3.5 MPa, resistance to pH 2–14 and overcoating in 1.5 hours.
View details
Polyurethane & anti-corrosionVinyl ester heavy-duty anti-corrosion intermediate coat
Vinyl ester intermediate coat resistant to 98% sulphuric acid and 40% sodium hydroxide; bond strength ≥ 8 MPa on steel and ≥ 3.5 MPa on concrete, with water impermeability ≥ 1.5 MPa.
View detailsNeed this system specified for your project?
Tell us the substrate and the load. We will confirm the build-up, coverage rate and lead time.