Polyurethane & anti-corrosionUltra-abrasion polyurethane topcoat
Three-component, high-solids polyurethane topcoat reinforced with inorganic metallic aggregate: abrasion 0.010 g in testing (standard limit ≤ 0.030 g), UV-stable and non-yellowing, for indoor and outdoor use.
Group-level sales figure for the 2025 financial year, shown as an approximate value.
Overview
This ultra-abrasion polyurethane topcoat is a three-component, high-solids, highly wear-resistant polyurethane coating material formulated with aliphatic isocyanate as the main film-forming substance. The cured film has a high cross-linking density and good flexibility, and the addition of highly wear-resistant, high-temperature-resistant inorganic metallic aggregates gives the coating high hardness, good scratch resistance and a slightly textured surface. Formulated with reference to the national standard GB/T 22374-2018.
Key features
- Slightly textured semi-gloss finish: low-reflection, glare-free surface that also improves slip resistance
- Outstanding wear and impact resistance: high-hardness film with good scratch resistance, reinforced by wear-resistant and high-temperature-resistant inorganic metallic aggregates
- Excellent UV resistance with no yellowing, based on the aliphatic isocyanate binder
- Very good resistance to chemical corrosion
- Environmentally friendly: high solids content and low VOC
Recommended for
- Indoor and outdoor areas requiring anti-slip performance, high abrasion resistance, weather resistance, a semi-gloss finish, low reflection and low noise
Technical data
- Condition in container
- Uniform after stirring, no hard lumps
- Drying time
- Surface-dry ≤ 8 h / through-dry ≤ 48 h
- Colour and appearance
- Uniform colour, slightly textured surface
- Tensile bond strength (standard conditions)
- ≥ 2 MPa
- Abrasion resistance (750 g/500 r)
- Measured 0.010 g (standard requires ≤ 0.030 g)
Values are typical and depend on substrate, ambient conditions and build-up. Request the current TDS before specifying.
Finished floors
Real floors finished with this system.
Test reports & certificates
Scans of official third-party reports. Click a cover to read the full document.
Related systems
Polyurethane & anti-corrosionWaterborne polyurethane mortar
Organic-inorganic interpenetrating-network mortar: abrasion ≤ 0.02 g, compressive strength ≥ 80 MPa, service from −40 °C to 120 °C and pH 1–14 chemical resistance.
View details
Polyurethane & anti-corrosionTransparent vinyl ester primer
Vinyl ester primer with nano-level penetration of 5–8 mm, tensile strength ≥ 3.5 MPa, resistance to pH 2–14 and overcoating in 1.5 hours.
View details
Polyurethane & anti-corrosionVinyl ester heavy-duty anti-corrosion intermediate coat
Vinyl ester intermediate coat resistant to 98% sulphuric acid and 40% sodium hydroxide; bond strength ≥ 8 MPa on steel and ≥ 3.5 MPa on concrete, with water impermeability ≥ 1.5 MPa.
View detailsNeed this system specified for your project?
Tell us the substrate and the load. We will confirm the build-up, coverage rate and lead time.